• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 55 subscribers
  • Views 430 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/EVMK2H: PC Trace not start

George Rodionov
Expert 1210 points
Part Number: EVMK2H
Other Parts Discussed in Thread: SYSBIOS

Tool/software: Code Composer Studio


SYSBIOS: 6.76.04.02
CCS: 9.3
NDK: ndk_3_61_01_01
SDK: pdk_k2hk_4_0_15
Device: [EVMK2H]

I faced with strange trouble. When I try start PC Trace nothing happened and in menu appear empty line:

Restart CCS, reboot PC and change workspace in CCS not help to solve this trouble.

When I call "Analysis Dashboard" the next error window arise:

How to fix this error and continue work with PC trace?

George.

  • 0
    TI__Guru**** 171309 points

    Hi,

    I am not entirely sure what may be happening in your case; were you able to select PC Trace and actually capture data using it? I was able to set up and run PC Trace on my K2HEVM using the XDS200 Debug Probe. I am using CCSv9.3 and 

    Since you mentioned using a different workspace and rebooting, I suspect that something may not be right with the temporary trace files (they are not cleared when a new workspace is opened).

    Can you try to erase the directory C:\Users\user\.TI-trace - you need to close CCS first. 

    Also, make sure the board is power cycled between attempts of tracing data - sometimes the device is not properly configured after a trace job is setup. 

    I will keep trying to break my setup here and will report back in case I find anything relevant. 

    Regards,

    Rafael

  • 0 in reply to desouza
    Expert 1210 points

    I removed folder C:\Users\%USERNAME%\.TI-trace and that helped.

    Thanks,

    George