CCS: 3.1

Priscilla Heard

Prodigy 35 points

Tool/software: Code Composer Studio

I need to download the full version of CCS 3.1.

over 5 years ago

0 JohnS over 5 years ago

TI__Guru**** 162895 points

Priscilla,

Would this be the C2000 or Platinum version of CCSv3.1?

What device is this for?

Is this to replace media that was lost or is this for a new design?

Regards,

John

0 Priscilla Heard over 5 years ago in reply to JohnS

Prodigy 35 points

John,

I am not sure if this is for CS2000 or Platinum. This is to program using a XDSS10 USB JTAG Emulator. It is to replace a lost media from a really old project.

This is the information I have that I will need for development:

Software Entity	Description	Using System Name	Manufacturer or Publisher	Version	Release Date	Platform
CCS 3.1 IDE	Development Tool	DSP Application	Texas Instruments	3.1	2005	Windows 2000/XP
SD CCS 3.1 Emulation Drivers	Emulation drivers required for JTAG Programmer	DSP Application	Spectrum Digital	3.01.04C	2005	Windows 2000/XP
CCS 3.1 IDE SP1 Rev2	Development Tool Service Pack 1	DSP Application	Texas Instruments	2	2006	Windows 2000/XP

0 JohnS over 5 years ago in reply to Priscilla Heard

TI__Guru**** 162895 points

Priscilla,

I sent the link to CCSv3.1 via a private message. You should be able to obtain the spectrum digital drivers from their website. Here is the link to the SP1 Rev2 update for CCS. http://software-dl.ti.com/dsps/dsps_public_sw/sdo_ccstudio/CCSv3/CCS_3_1/exports/CCS_3.1.23.0_SP1_Rev2.exe

Regards,

John

0 Priscilla Heard over 5 years ago in reply to JohnS

Prodigy 35 points

John,

Thank you for the link. I have successfully downloaded the CCS v3.1 software. I am going to setup a virtual machine to install it on. Hopefully this is what I need.

Again thanks,

Priscilla

0 JohnS over 5 years ago in reply to Priscilla Heard

TI__Guru**** 162895 points

Priscilla,

Using a Windows XP virtual machine is a good idea.

Regards,

John

Code Composer Studio™︎

Code Composer Studio forum

CCS: 3.1