CCS/TMDSDOCK28379D: Getting started with TMDSDOCK28379D development kit

Ahmed Taha1

Part Number: TMDSDOCK28379D
Other Parts Discussed in Thread: TMS320F28379D, C2000WARE

Tool/software: Code Composer Studio

I am trying to load any existing example from C2000ware into my microcontroller TMS320F28379D. I am having difficulties in connecting my board with the CCS. Is there any reference manual/ video available for the procedure for the beginners.

I have got F2837x controlCARD R1.3

Regards

Taha

over 6 years ago

0 JohnS over 6 years ago

TI__Guru**** 163075 points

Taha,

Are you getting an error message from CCS? If so what is it.

There is a workshop on using CCS with F28379D. It uses the LaunchPad but at lot of the content is applicable for learning CCS: http://dev.ti.com/tirex/explore/node?node=ANJXzL69ZqXoHLjas70yCQ__FUz-xrs__LATEST

Page 4 of the users guide for the controlCARD describes the switch settings for enabling debug in table 1. The settings vary based on if you are using the controlCARD on its own or on the larger baseboard with an external debug probe.

https://www.ti.com/lit/ug/sprui76a/sprui76a.pdf

Regards,

John

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMDSDOCK28379D: Getting started with TMDSDOCK28379D development kit