CCS/TMS320F28379D: Error #16000 When building SYS/BIOS template project using output format ELF

Eduardo da Silva Pino

Part Number: TMS320F28379D
Other Parts Discussed in Thread: SYSBIOS

Tool/software: Code Composer Studio

Hi!

I have created a new CCS Project according to the images below:

How ever if I try to Build the template project I get the following error:

I kind of understood the error message but I am not quite sure how to fix this one.

I'm using CCS 9.3.0 by the way.

0 George Mock over 5 years ago

The most likely explanation is the version of TI-RTOS you use does not support EABI. Is changing to the older COFF ABI a practical alternative?

Thanks and regards,

-George

0 desouza over 5 years ago

Hi,

Just adding to George's response, I was able to properly build the Typical example using SYSBIOS 6.73.01.01 for my F28379D.

This seems to give weight to his initial suspicion.

Hope this helps,

Rafael

0 Eduardo da Silva Pino over 5 years ago in reply to George Mock

Thanks George!

Sure, I can change to COFF, but is there a SYS/BIOS version known to support EABI?

0 ToddMullanix over 5 years ago in reply to Eduardo da Silva Pino

Hi Eduardo,

For C28, we currently do not have support for ELF, only COFF.

Todd

Code Composer Studio forum