CCS/TMS320F2812: How to integrate or use VectorCast Unit Testing Tool with CCS 7 ?

Aniket,

I do not have a VectorCAST software license.  I would suggest contacting VectorCAST for support:

https://www.vector.com/int/en/support-downloads/support/#c54331

Regards,

John

Hi John,

Thanks for quick response.

i just want steps, how do i integrate VectorCast with CCS, if possible ??... if we cant integrate VectorCast with CCS, then how to use it for Firmware testing?

If you can provide basic steps for the same, that would be very helpful and appreciable.

Note: I am using CCS7 and TMS320F2812, i have vector cast license as well.

Aniket,

I am sure if you contact VectorCAST they can provide you with that information.

It is possible to integrate the tools.  However I cannot provide you with the steps as I do not know what they are.

Regards,

John

Aniket,

I just spoke with a couple guys from VectorCAST on the phone.  They integrate our compiler/linker toolchain into VectorCAST and then make use of our automation interface to load the application onto the device and extract data.  They were very responsive to questions.  I highly suggest reaching out to VectorCAST for more information.

Regards,

John