CCS/TMS320F28377S: How to view EPWM waveforms in CCS

Analogics Rnd Solar

Tool/software: Code Composer Studio

Hi everyone,

I have TMS320F28377S launch pad I want to watch the generated epwm on my PC. I don't have an oscilloscope with me, is there any way to simulate the code in CCS and check the epwm's.

Thanks in advance.

over 5 years ago

0 desouza over 5 years ago

TI__Guru**** 171729 points

Hi,

Not necessarily the PWM itself, but you can use the graph tool to look at the values used to set the pulse width on the device.

Keep in mind this is not a real-time tool, thus it does not replace an oscilloscope.

Details about the graph tool are shown in section 7.7 of the CCS User's Guide

https://software-dl.ti.com/ccs/esd/documents/users_guide/index.html

Hope this helps,

Rafael

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS320F28377S: How to view EPWM waveforms in CCS