CCS/TMDX654IDKEVM: CCS - Identify trap

Girish K1

Tool/software: Code Composer Studio

Hello,

How do I know where exactly a trap occurred while executing a program? in the debug tab of CCS, I not see any details on this.

I am executing a code and exception occurs and it directly goes to the interrupt handling. But I am facing trouble to know which instruction caused trap.

Thanks in advance.

-Girish

over 6 years ago

0 Ki over 6 years ago

TI__Guru**** 482651 points

Hi Girish,

Assuming you are debugging the A53, you can try using trace.

Please see the below thread for more details:

https://e2e.ti.com/support/tools/ccs/f/81/p/873166/3230068

Thanks

0 Girish K1 over 6 years ago in reply to Ki

Prodigy 80 points

Thanks Ki, That helped me a lot.

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMDX654IDKEVM: CCS - Identify trap