Can I use my BlackHawck USB560BP with CCS5 on Windows?

Jeremy Larsen

I have a BH-USB-560BP and want to use it with the latest CCS5. Is it a supported emulator on windows? How do I get the drivers?

over 14 years ago

0 JohnS over 14 years ago

TI__Guru**** 162315 points

Jeremy,

It should be fine on Windows. I have a 560BP that I can try on Monday. I can see the Blackhawk drivers in my CCSv5.0.1 install.

What device are you trying to connect to?

Regards,

John

0 JohnS over 14 years ago in reply to JohnS

TI__Guru**** 162315 points

Jeremy,

I was able to use my BH 560bp with CCSv5.0.1 and connect to both the ARM and the DSP on DM6467. So it seems to be ok.

Regards,

John

0 Richard Tennis over 14 years ago in reply to JohnS

Prodigy 250 points

As JohnS says, it works fine. I am using it on a C6455 board we designed.

As for where to get the drivers, they are included in the CCS install. Just plug the BH560bp in and Win XP finds the correct drivers.

Richard.

0 Jeremy Larsen over 14 years ago in reply to JohnS

Prodigy 250 points

I was able to get the driver working. I am trying to connect to a DM365. It is a flashless board. It boots from USB using ubl. I am having trouble connecting to the ARM. Is there a certain state that the ARM needs to be in?

0 desouza over 14 years ago in reply to Jeremy Larsen

TI__Guru**** 171104 points

Jeremy,

ARM9s are a bit finicky about adaptive clocking. The page below contains additional details about it and question 3.4 shows how to enable it in your configuration:

http://processors.wiki.ti.com/index.php/Adaptive_Clocking

Hope this helps,

Rafael

Code Composer Studio™︎

Code Composer Studio forum

Can I use my BlackHawck USB560BP with CCS5 on Windows?