Compiler: How to drive TPS929120Q1?Especially the software？

user6350561

Prodigy 65 points

Other Parts Discussed in Thread: TPS929120-Q1

Tool/software: TI C/C++ Compiler

How to drive TPS929120Q1?Especially the software？Can you provide a reference routine?Thank you。

over 5 years ago

0 Frank Qiu over 5 years ago

TI__Genius 15776 points

You can reference this FAQ:

https://e2e.ti.com/support/power-management/f/196/p/895281/3316198?tisearch=e2e-sitesearch&keymatch=tps929120-q1#3316198

0 user6350561 over 5 years ago in reply to Frank Qiu

Prodigy 65 points

Thank you very much for your reply. Is there any case of using STM32F103 series microcontrollers? My plan is to use this chip to control 5 TPS929120. please.

0 Frank Qiu over 5 years ago in reply to user6350561

TI__Genius 15776 points

Sorry we don't have a temple for that MCU but you can reference the setting by our FAQ

0 user6350561 over 5 years ago in reply to Frank Qiu

Prodigy 65 points

Hello sir, how do you use the routine of S9KEAZ128 to control 10 TPS929120? Is it EEPROM or ADDR?

0 Frank Qiu over 5 years ago in reply to user6350561

TI__Genius 15776 points

Because TPS929120-Q1 4 internal address bit and 3 external address pin, and the fault address set is the MSB of internal address + 3 external address pin.

So that can cover 10 pcs of TPS929120-Q1