CCS/CC2640R2F: SPI: Sensor Controller Studio. AFE4400.

Some of the examples for this device can be found here: https://dev.ti.com/tirex/explore/node?node=APwBWdtqTgxZuJ9l4iRqpQ__krol.2c__LATEST including spimaster and spislave. 

Hello,

As I mentioned in my question above.

What I need help in is cc2640r2f spi in Sensor controller studio.

I have already interfaced afe4400 Nd cc2640r2f. But now I need to dive in ultra low power using sensor controller studio.

Hence please guide me to proper link or help.

Regards,

Moin Shaikh

Have you checked the help: https://software-dl.ti.com/lprf/sensor_controller_studio/docs/cc13x0_cc26x0_help/html/spi_data_transfer__0.html

Hello,

I went through the documentation and tried writing code accordingly.

But now in SCS, I am getting an error saying Out of Ram.

What to do?

Regards,

Moin Shaikh

If you are out of RAM you have to reduce the size of your code. Do you have only one function or more than one? If the latter you can split your program over more than one image. 

"split your program over more than one image"

What do you mean by this?

I am new to SCS, hence please forgive my simple questions.

How to achieve the following?

Regards,

Moin Shaikh

If you have a code that contains (as an example) 2 tasks and this code is too big, it's possible to split the task into 2 different RAM images . Then you have to give a "source code prefix" in the Project panel. You then have to to a init on one of the images and uninit again before init the second image.