Plot functions with CCS

Meriem Demraoui

Intellectual 260 points

Hello,

i want to visualize the result in fichier.out with CCS, i have to generate functions with numerical

technique, is there possible to plot function with CCS or it must to have emulator??

Regards.

over 15 years ago

0 Ki over 15 years ago

TI__Guru**** 480791 points

CCS comes with several simulators. You can see if there is a simulator for your device that models the components you need.

Thanks

0 Meriem Demraoui over 15 years ago in reply to Ki

Intellectual 260 points

Hello,

i didn't find a simulator for DSP6713, is there an other solution for this question? thanks

Regards,

Meriem

0 Ki over 15 years ago in reply to Meriem Demraoui

TI__Guru**** 480791 points

What version of CCS are you using? There is a C6713 Device Cycle Accurate Simulator for CCS versions 3.1, 3.3 and 4.x.

0 Meriem Demraoui over 15 years ago in reply to Ki

Intellectual 260 points

i have CCS v.3.1, how can i have this simulator?? thanks

Regards.

Meriem Demraoui

0 Ki over 15 years ago in reply to Meriem Demraoui

TI__Guru**** 480791 points

In CCSetup:

0 Meriem Demraoui over 15 years ago in reply to Ki

Intellectual 260 points

Hi,

thanks a lot for your reply, i have errors about libraries and memory when i load the program so i cant to run it :

0 Ki over 15 years ago in reply to Meriem Demraoui

TI__Guru**** 480791 points

I see that you are trying to use an example specific to the 6713 DSK (you are using the 6713 DSK BSL). For this example you will not be able to run it on a simulator without modification. You will need the 6713 DSK board. Sorry.

0 Meriem Demraoui over 15 years ago in reply to Ki

Intellectual 260 points

Hello,

thanks for your reply, in DSK there is an output( LINE OUT), i want to connect this output with an oscilloscope to

see the sinusoide generated, do you have any idea of the cable and its caracteristic that using in this procedure?

0 Ki over 15 years ago in reply to Meriem Demraoui

TI__Guru**** 480791 points

Hi,

This forum is for questions related to the Code Composer Studio software. Since your question is unrelated to CCS, you may want to try one of the other forums, maybe the C67x device forum and see if you can get more help there:

http://e2e.ti.com/support/dsp/tms320c6000_high_performance_dsps/f/115.aspx

Thanks

Code Composer Studio™︎

Code Composer Studio forum

Plot functions with CCS