CCS/CCSTUDIO: Realtime debug mode

Ryuuichi machida

Part Number: CCSTUDIO
Other Parts Discussed in Thread: TMS320F28379D

Tool/software: Code Composer Studio

Hello,

I'm trying to use "continuous refresh" with real-time debug mode.

However, when I use "Expressions" to watch behavior of register value, this function work correctly. On the other hand, when I use "Registers" to watch behavior of register value, it seems that this function does not work correctly.

Could you please give me your opinion to solve this issue ?

Here is my environment.

1. CCS version : 10.1.0.00010

2. XDS version : Release 9.2.0.00002

3. Target device : TMS320F28379D (Use Launchpad of F28379D)

If you have any question about my environment, please let me know.

BR,

over 5 years ago

0 Ki over 5 years ago

TI__Guru**** 472451 points

Machida-san,

I briefly tried real-time mode on my F2837xS target and it worked well for both Expressions and Register views. Could you provide more details on the registers you observing? Would it be possible to provide a small reproducible test case (I would just need the *.out file)?

Thank you

0 Ryuuichi machida over 5 years ago in reply to Ki

Guru 12970 points

Hello Ki,

Thank you for your confirmation.

Attached is execusion file which I used.

And I confirmed GPIODataRegs.GPBDAT.

Best Regards,3716.timed_led_blink_cpu01.zip

0 Ki over 5 years ago in reply to Ryuuichi machida

TI__Guru**** 472451 points

Machida-san,

Thank you for the attachment. I ran the out file and I see successful real-time update of both expressions and registers view (GPIO34). Please see attached video:

/cfs-file/__key/communityserver-discussions-components-files/81/realtime.zip

In your environment you only see GPIO34 in the expressions view update but it never changes for the registers view? Just to confirm, "continuous refresh" is enabled in both, correct?

Code Composer Studio™︎

Code Composer Studio forum

CCS/CCSTUDIO: Realtime debug mode