"MSP430: Trouble Reading Memory Block at 0xa1914 on Page 0 of Length 0x119: Invalid parameter(s)"

Jorge Corado

Other Parts Discussed in Thread: MSP430F5418A

I am experimenting a problem with the MSP430 and CCS (ver 4.2.1.00004 ), when I am debugging. After some time debugging my test board, I start to get the following error message:

"MSP430: Trouble Reading Memory Block at 0xa1914 on Page 0 of Length 0x119: Invalid parameter(s)"

Any suggestions will be appreciated.

Jorge

over 15 years ago

Ki over 15 years ago

TI__Guru**** 484901 points

Hi Jorge,

What exact MSP430 device are you using?

Thanks

Jorge Corado over 15 years ago in reply to Ki

Prodigy 25 points

Hi Ki,

I am using the MSP430F5418A.

Jorge

AartiG over 15 years ago in reply to Jorge Corado

TI__Guru**** 173310 points

Jorge,

Is this a TI board or your own custom board? The error could be related to power issues. Although the error is not exactly the same, this related post discusses a similar issue: http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/88394/305806.aspx#305806

If your board has jumpers for powering the device/board, check their settings to make sure it is being properly powered.

Code Composer Studio™︎

Code Composer Studio forum

"MSP430: Trouble Reading Memory Block at 0xa1914 on Page 0 of Length 0x119: Invalid parameter(s)"