• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 54 subscribers
  • Views 265 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Compiler/IWR6843AOP: SBL Q&A

Agate
Expert 1275 points

Part Number: IWR6843AOP

Tool/software: TI C/C++ Compiler

Dear TI 

After Uniflashing the sbl bin file and factory bin file in the same time,    then reboot the device the boot sequence is direct entry to the factory bin sequence. 

how to enter the update sequence not direct entry the factory sequence? 

BR

  • 0
    TI__Mastermind 33805 points

    Hi,

    Did you follow the procedure in the SBL documentation?

    Can you share a snapshot of the terminal printout?

    Regards,

    Charles O

  • 0 in reply to Charles Oladimeji
    Expert 1275 points

    Dear TI 

                     You can try your SDK 3.4 sbl .

                     We use TI Release bin file.   ( Meta Image 1 = sbl , Meta Image 4 = your bin file )

                     After uniflashing , the result: Reboot device the device direct goes to meta image setting. 

                     Normal product define:  It goes to update part  if  image  NG then go to meta image 4 ( factory image) 

    BR                

  • 0 in reply to Agate
    TI__Mastermind 33805 points

    Hi,

    I ran this and it works just as stated in the SBL documentation, if you do not load any image via XMODEM then it loads the backup image.

    Can you please provide some more details on the issue you are seeing?

    Regards,

    Charles O