CCS: CCS keeps getting hanged while importing a project

Mayuri Gulalkari

Other Parts Discussed in Thread: CONTROLSUITE, C2000WARE

Tool/software: Code Composer Studio

CCS keeps getting hanged while importing a project after reaching a specific position as can be seen in attached image. I even tried changing the workplace but no effect. Please suggest how to go about this.

over 5 years ago

0 Ki over 5 years ago

TI__Guru**** 480811 points

Hello,

What exact CCS version are you using?

Can you share the grid project that you are trying to import?

Thanks

0 Mayuri Gulalkari over 5 years ago in reply to Ki

Prodigy 70 points

Hello,

I am using CCS version 6. No matter which the project is it gets stucked at the same point. I even tried to import example projects in controlSUITE but the problem still persists.

Thanks,

mayuri

0 Ki over 5 years ago in reply to Mayuri Gulalkari

TI__Guru**** 480811 points

Is there any particular reason why you are using CCSV6? It is quite old and unsupported. I would recommend moving to a later CCS version and also using C2000Ware instead of ControlSUITE (unless your device is also older and not supported by C2000Ware).

Thansk

Code Composer Studio™︎

Code Composer Studio forum

CCS: CCS keeps getting hanged while importing a project