View Register do not indicate EDMA regs in CCSv4.

RY9983

Other Parts Discussed in Thread: OMAPL138

5633.rCSL_edmatc_001.xml

5811.rCSL_edmacc_001.xml

Hello.

I am using CCS v4.2.1.00004(newest version).
Target device is OMAPL138.
EDMA regs do not be displayed on View Registers, .
Does anyone find similar problem?
Could you help me to solve this?

I attach two .xml file which I found below hierarchy.
C:\Program Files\Texas Instruments\ccsv4\common\targetdb\Modules\OMAPL138_C6748

I can not open this file.
I think this file incorrect.

Could you give me correct .xml file?

Best regards,
RY

over 15 years ago

0 JohnS over 15 years ago

TI__Guru**** 163045 points

RY,

Attached are the latest files that I have.

8420.edma_xml.zip

Regards,

John

0 RY9983 over 15 years ago in reply to JohnS

Guru 10570 points

Hello JohnS.

Thank you for the latest .xml file.
But, It is exactly the same as mine. (I try open your .xml files, but couldn't.)
Can you see the EDMA registers on your PC?

I would like to attach my screen shot.
Could you please some advice?

Best regards, RY

0 JohnS over 15 years ago in reply to RY9983

TI__Guru**** 163045 points

I see the same. I noticed if I put my mouse over I get the name in the tooltip. I will need to talk to the product group to see what is wrong with the files.

John

0 JohnS over 15 years ago in reply to JohnS

TI__Guru**** 163045 points

I see what they have done wrong in the file. They have the id field called name. I just tried swapping one to id and the register name now shows up correctly. I will try a quick search and replace and see if I can clean up the files.

John

0 JohnS over 15 years ago in reply to JohnS

TI__Guru**** 163045 points

Try these files. They go in \ccsv4\common\targetdb\Modules\OMAPL138_C6748

2476.edma.zip

When I use these I see all the register and bitfield names.

John

0 RY9983 over 15 years ago in reply to JohnS

Guru 10570 points

Hello JohnS.

Thank you so much for your support !
I could see EDMA registers and bitfields.

Best regards, RY

Code Composer Studio™︎

Code Composer Studio forum

View Register do not indicate EDMA regs in CCSv4.