CCS/TMS320F28335: CCS: GEL Expression pop-up and the CCS gets stuck

Hao Wen

Tool/software: Code Composer Studio

Hello,

I am running CCS v10.0 and using f28335 experimenter kit to control my circuit. When the input voltage of my circuit becomes higher, the GEL expression will pop-up and the CCS will get stuck. Can you give me some suggestions to solve this issue? Thanks a lot!

over 5 years ago

0 Hao Wen over 5 years ago

Prodigy 200 points

0 Ki over 5 years ago

TI__Guru**** 484151 points

Hao Wen said:
When the input voltage of my circuit becomes higher, the GEL expression will pop-up and the CCS will get stuck

Does this error not occur if the input voltage is lower? If that is the case, there may be some action in the OnTargetConnect() callback that is failing when the input voltage is higher.

Thanks

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS320F28335: CCS: GEL Expression pop-up and the CCS gets stuck