CCS/TM4C1294NCPDT: Environment varibables not take effective

Sheldon He

Tool/software: Code Composer Studio

Hi expert,

I am modifying some environment variable in my CCS to get project built. I find these environment variables didn't take effect after changing as shown in the second picture.

Thanks

Sheldon

over 5 years ago

0 Ki over 5 years ago

TI__Guru**** 486221 points

Hi Sheldon,

After your changed the variable value in the first screenshot, did you press the "Apply and Close" button?

Thanks

0 Sheldon He over 5 years ago in reply to Ki

TI__Expert 8585 points

Hi Ki,

Yes, I applied it.

PS: This issue happens on my CCS 8.1.0, I use this version for already installed device support for TM4C. Today I tried on CCS10.1.0, this issue goes away.

Thanks

Sheldon

0 Ki over 5 years ago in reply to Sheldon He

TI__Guru**** 486221 points

I tried this with CCS 8.3.1. The issue does not happen for me. If you need to stick with CCS 8x, can you try upgrading to 8.3.1 and see if the issue occurs there?

Thanks

Code Composer Studio™︎

Code Composer Studio forum

CCS/TM4C1294NCPDT: Environment varibables not take effective