CCS: IcePick_D : Error connecting to the target :cannot access register at 0x00000000 (Error -2313) @ 0 (0x0)

Asha Diggi1

Tool/software: Code Composer Studio

Hi all,

I am using code composer studio v5.0.3, to test the board TMDXEVM6618L,

I am newbie, could any one tell me how to check the board working of TMDXEVM6618L how do I test that board ,any link?

I am just trying to print the hello world program,but getting the error message

"IcePick_D : Error connecting to the target : canot access register at 0x00000000 (Error -2313) @ 0 (0x0)"

could any one help me to solve this issue.

Regards,

ASHA.

0 Ki over 4 years ago

Hello,

Asha Diggi1 said:
I am newbie, could any one tell me how to check the board working of TMDXEVM6618L how do I test that board ,any link?

Please run the JTAG connectivity test in CCS and post the full results to this thread:

Asha Diggi1 said:
I am using code composer studio v5.0.3, to test the board TMDXEVM6618L,

Note that you are using an old an unsupported version of CCS. I would strongly recommend updating your CCS version to something more current.

Thanks

Code Composer Studio forum