• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 54 subscribers
  • Views 894 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/OMAP-L138: Edit/View Existing RTSC Platform

Hakan B
Expert 1120 points

Part Number: OMAP-L138

Tool/software: Code Composer Studio

Hello TI,

 There is a platform already created by another developer in my OMAPL138-ARM project. I was using it, but then I needed to change the memory map. I realized that in order to change an EXISTING platform, you need to go File -> New -> View/Edit RTSC Platform (see below).

Doesn't it make sense to use "File -> Import" menu instead of "File -> New" menu. Because the platform already exists and for existing stuff, we normally use "Import" (example below).

I am using CCS 7.4.0. Please ignore this issue, if you already fixed it in the newer CCS versions.

Regards,

Hakan

  • 0
    TI__Guru**** 478711 points

    Hello,

    The links to your screenshots are broken. See the below FAQ for a potential reason why:

    https://e2e.ti.com/support/tools/ccs/f/81/t/821597

    Hakan B said:
    you need to go File -> New -> View/Edit RTSC Platform (see below).

    I don't see this option with my 7.4.0 install. I need to "Other" before I can access that option. However, the more common way to access it is via the 'Projects' menu:

    Hakan B said:
    I am using CCS 7.4.0. Please ignore this issue, if you already fixed it in the newer CCS versions.

    It is still the same in current CCS versions. Your request is a valid one, though to be honest this will likely not get addressed since we recommend people access the option from the 'Projects' menu and the RTSC platform editor is not being actively maintained.

    Thanks

    ki

  • 0 in reply to Ki
    Expert 1120 points

    Hello Ki,

    Thanks. I updated the pictures in my first post. I was not aware of "Project -> RTSC Tools -> Platfrom -> Edit/View" path that you mentioned. I opened the same window by "File -> New -> View/Edit RTSC Platform" path.

    I believe that editing already existing platform using "File -> New" menu, makes no sense to me.

    Thanks anyway.

  • 0 in reply to Hakan B
    TI__Guru**** 478711 points

    Hakan B said:
    I believe that editing already existing platform using "File -> New" menu, makes no sense to me.

    Yes, agreed. "Import" would indeed make more sense.