• Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 393 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

problems of migrating

Valdis Ivanov
Prodigy 140 points

Other Parts Discussed in Thread: CONTROLSUITE

I am trying to migrate a project Flash LEDs from CCS 3.3 to CCS 4.

When building the FlashingLEDs example code a, I get the following error messages in the console during the build.

C:\Program Files\Texas Instruments\ccsv4\utils\gmake\gmake: *** No rule to make target `DSP2802x_CodeStartBranch.obj', needed by `TE-TMS320F28027.out'.
C:\Program Files\Texas Instruments\ccsv4\utils\gmake\gmake: *** No rule to make target `DSP2802x_GlobalVariableDefs.obj', needed by `TE-TMS320F28027.out'.

Help me fo solve this problem, please!   Thanks in advance!

  • TI__Guru**** 173310 points

    Could you copy the full output in the build console, paste it to a text file and attach it here so we can see if there were any other errors reported in the build?

    Do you have ControlSuite installed to access the support and header files?

    There is a related post here with a similar error which you may want to take a look at to see if those suggestions help resolve the issue.