line 13: fatal error #1965: cannot open source file "xdc/std.h"

Sijin John

Other Parts Discussed in Thread: SYSBIOS, TDA2

[TIARM] Compiling C tivx_event.c

"/home/devuser/OpenVX/tiovx/source/platform/vision_sdk/bios/tivx_event.c", line 13: fatal error #1965: cannot open source file "xdc/std.h"
1 catastrophic error detected in the compilation of "/home/devuser/OpenVX/tiovx/source/platform/vision_sdk/bios/tivx_event.c".
Compilation terminated.

>> Compilation failure
concerto/finale.mak:287: recipe for target '/home/devuser/OpenVX/tiovx/out/TDAX/M4/SYSBIOS/debug/module/source.platform.vision_sdk.bios/tivx_event.obj' failed
make: *** [/home/devuser/OpenVX/tiovx/out/TDAX/M4/SYSBIOS/debug/module/source.platform.vision_sdk.bios/tivx_event.obj] Error 1

I am getting this error when building tiovx on LInux Dessktop.

over 4 years ago

0 Gaviraju Doddabettahalli Bettegowda over 4 years ago

TI__Genius 14305 points

Hi,

Are you using the vision SDK?

Can you share the steps to reproduce the issue?

Thanks

Gaviraju

0 Sijin John over 4 years ago in reply to Gaviraju Doddabettahalli Bettegowda

Prodigy 130 points

No, processor SDK from this link :- https://git.ti.com/cgit/processor-sdk/tiovx/tree?h=master.

i followed the steps from this link :-http://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/latest/exports/docs/tiovx/docs/user_guide/BUILD_INSTRUCTIONS.html#autotoc_md0

sudo -E add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt-get update
sudo apt-get install gcc-5 g++-5
sudo apt-get install libpng-dev
sudo apt-get install zlib1g-dev
sudo ln -s /usr/include/x86_64-linux-gnu/zconf.h /usr/include
cd tiovx
make

0 Praveen Eppa1 over 4 years ago in reply to Sijin John

TI__Genius 17580 points

Hi,

Is this on TDA2 or TDA4 ?

Thanks,

Praveen

0 Karthik Ramanan over 4 years ago in reply to Sijin John

TI__Guru** 113810 points

Hi Sijin,

Few questions:

Please confirm that your intended platform is TDA4/J7ES.
The method that you are trying to build is not the recommended approach, you should be downloading the latest SDK from https://www.ti.com/tool/PROCESSOR-SDK-J721E, both the Linux and RTOS variants and then you should be following the instructions from within the SDK. The steps do not involve you to clone any repository.

Kindly repeat this process with the standard recommended method and let us know if you still face issues.

Regards

Karthik

0 Sijin John over 4 years ago in reply to Karthik Ramanan

Prodigy 130 points

The link you shared is not opening.

0 Chester Gillon over 4 years ago in reply to Sijin John

Guru 92251 points

Sijin John said:
The link you shared is not opening.

There was a extra comma at the end of the URL. Try https://www.ti.com/tool/PROCESSOR-SDK-J721E

0 Praveen Eppa1 over 4 years ago in reply to Chester Gillon

TI__Genius 17580 points

Hi Sijin,

Did you get a chance to try above shared link ?

Thanks,

Praveen

Code Composer Studio™︎

Code Composer Studio forum

line 13: fatal error #1965: cannot open source file "xdc/std.h"