• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 54 subscribers
  • Views 2560 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Error: Program "make" not found in PATH

Hauke Schlosser
Intellectual 260 points


Hello together,

I downloaded a sample project for the RF430FRL152 here: www.ti.com/.../RF430FRL152H

When I want to debug a project there is the error: "Error: Program "make" not found in PATH". Andy ideas what I am doing wrong? I already switched the workspace and other projects are working. Just not the sample projects.

Thanks

  • 0
    TI__Mastermind 18265 points

    Hello Hauke,

    how have you imported the project into the CCS?

    The right way would be when you go the following path:

    File -> Import -> C/C++ -> CCS Projects

    then "Next"

    check "Select Archive File" and browse to your downloaded ZIP file. This should open the file and shows you all containing projects.

    Best Regards,

    Helfried