Cant Build or Debug project

Juan Pablo Jiménez

Hi,
I'm very new in working with MCU, at work, they bought me a CC1352R1 launchpad and it works wonders with the sensor controller studio, however, whenever I try to make a program with Code Composer Studio, it wont even debug or build, I've been having this issue for 3 weeks, I haven't been able to achieve anything using CCS.

over 5 years ago

0 TER over 5 years ago

TI__Guru**** 317180 points

This could be related to the project setup. I would advice to import one of the examples from the SDK (the empty example is one suggestion https://dev.ti.com/tirex/explore/node?node=AI6sL0lYMYZywLdgCaGo-A__pTTHBmu__LATEST) and start from this.

0 Juan Pablo Jiménez over 5 years ago in reply to TER

Prodigy 40 points

Hello, thanks for the tip, however this error persists in no matter what example I use. The program from the image is based on the empty example as you recommend

0 TER over 5 years ago in reply to Juan Pablo Jiménez

TI__Guru**** 317180 points

Are you able to download one of the examples from the SDK when you don't do any changes to the project?

0 Juan Pablo Jiménez over 5 years ago in reply to TER

Prodigy 40 points

The same error pops up

0 TER over 5 years ago in reply to Juan Pablo Jiménez

TI__Guru**** 317180 points

If you just build the project, does this complete successfully and if yes, are you able to see the .out file under debug?

- Which SDK version are you using (version)

- Do you use the same CCS version that is described in the release notes for the SDK?

0 Juan Pablo Jiménez over 5 years ago in reply to TER

Prodigy 40 points

I cannot build the example, but for the same example the .out is visible under debug
- SDK version is 4.40.04.04 for CC13x2 26x2
- CCS was downloaded from the same page where the SDK was, version 10.2.0.00009

0 TER over 5 years ago in reply to Juan Pablo Jiménez

TI__Guru**** 317180 points

Could you post a screenshot of how your CCS window looks like when you try to build?

0 Juan Pablo Jiménez over 5 years ago in reply to TER

Prodigy 40 points

Sure thing!

+1 TER over 5 years ago in reply to Juan Pablo Jiménez

TI__Guru**** 317180 points

Any reason you have selected a freertos project? I would recommend you start with a ti-rtos project. If you want freertos, look into the documentation on how to install it.

0 Juan Pablo Jiménez over 5 years ago in reply to TER

Prodigy 40 points

I´m fairly new at this and I don´t know the difference, but loading a ti-rtos project actually solved my issue! Thanks a lot for your patience and time!

Code Composer Studio™︎

Code Composer Studio forum

Cant Build or Debug project