TIDA-01606: 10-kW, bidirectional three-phase three-level (T-type) inverter and PFC reference design

abdin Ulin Nuha

Part Number: TIDA-01606
Other Parts Discussed in Thread: C2000WARE-DIGITALPOWER-SDK

Dear Expert

How to (step by Step) porting the source code from F28379D (dual core) to F28379S (single core), i just want to reduce IC pin and CPU

is it just replace the that ".asm & linker" to F2837xD to F2837xS and re compile ?

Thank you

Abdin

0 Manish Bhardwaj over 4 years ago

Abdin,

Its best to create a new projectspec in the C2000ware-digitalpower-sdk solutions folder under devices / new devices/ ccs

following document outlines the steps,

0 Manish Bhardwaj over 4 years ago in reply to Manish Bhardwaj

if the change is simply from dual core to single core

1. Go to project properties and under General -> Project -> Variant , make sure you select the right device

2. Next copy the files from the xS device under the device folder , including driverlib

re-compile and resolve errors

Simulation, hardware & system design tools forum