This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-010031: TIDA-010031 Schematic clarification

Part Number: TIDA-010031

Hello 

we are using TIDA-010031 reference design for our project . For which I was downloaded the Gerber and manufacturing the demo board for our use

but we need some clarification on below query:

1) Refer below image fab drawing drill details & NC DRILL file drill detail not matched,

Fab drawing drill details:

NC DRILL details:

2) is it a 2 layer or 4 layer PCB? As per "Readme.jpg" image you required 2 layer PCB but in gerber data 4 layer is present

Regards

dhiren

  • Hi Dhiren,

    You can use the PCB file of TIDA-010031 to output NC DRILL file, and use the output of PCB as the standard.

    I checked the PCB file, this is a double-sided design. You can re-export the gerber according to the PCB file of TIDA-010031 to check.

    Thanks.

    Jenson