PSpice for TI simulation error： There are no data values in section number 1 ignoring this section

Kaustubh Talele

Hi, I am facing the same problem. This error 'There are no data values in section number 1 ignoring this section', is popping up. I have tried the remedies mentioned in the above conversation however the error still persists.
Please guide me if you know the solution. Thank you.
- Kaustubh
BuckConTrial1.dsn

over 3 years ago

0 JC Zhu over 3 years ago

TI__Mastermind 37540 points

HI,

That's because your simulation did not complete. Please archive your project according to this FAQ and share it with us:

https://e2e.ti.com/support/tools/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/969692/faq-pspice-for-ti-how-do-i-share-pspice-for-ti-projects?tisearch=e2e-sitesearch&keymatch=faq%252525253Atrue

Thanks,
JC

0 Kaustubh Talele over 3 years ago in reply to JC Zhu

Prodigy 10 points

Thanks for the guidelines. Attaching the achieved project here.
buckcontrial1-2021-11-16T05-43.zip

0 JC Zhu over 3 years ago in reply to Kaustubh Talele

TI__Mastermind 37540 points

Hi Kaustubh,

I've verified that the simulation ran into a convergence error. Will have product experts to review your design.

Thanks,
JC

0 Kaustubh Talele over 3 years ago in reply to JC Zhu

Prodigy 10 points

Hi JC Zhu,

Thank you so much for the support. Experts' opinion would be very helpful.

Thanks,
Kaustubh

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PSpice for TI simulation error： There are no data values in section number 1 ignoring this section