• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 38 subscribers
  • Views 428 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-01485: TIDA-01485_Firmware question

Akila Sadhasivan
Expert 1210 points

Part Number: TIDA-01485
Other Parts Discussed in Thread: DRV8323,

Does TIDA-01485_Firmware use the SPI communication channel to communicate between MSP430 and  DRV8323? I see the SPI GPIO being setup, but cannot locate the code that performs any SPI communication. Please advice.

  • 0
    TI__Intellectual 2505 points

    Hi ,

    My current software is restricted from viewing the software and I am working on that.

    I checked 3.1.2.3 Configuring the DRV8323 Registers (drv8323.c) in the application manual and saw that there is a spi operation on the DRV8323. You can check it out.

    If this function is not being called, then I think maybe an initialized configuration is used.

    Thanks

    Jenson