CAN TX/RX Messages Basic Test

Mirna Habib

Other Parts Discussed in Thread: TDA4VL

Hi,

We are using EV Board: j721EXCP01EVM with controller TDA4VL,

How can we use the TI Demo App to simulate CAN messages and How can we see TX/RX messages on CANoe Trace using the Demo App

over 3 years ago

0 Karan Saxena over 3 years ago

TI__Guru* 78035 points

Can you use the PDK's CSL example?

This is under pdk/packages/ti/csl/example/mcan/mcanEvmLoopback/mcan_evm_loopback_app_main_k3.c

Regards

Karan

0 Mirna Habib over 3 years ago

Prodigy 10 points

Hi Karan,

The mentioned example is a Loopback mode test, we need to see real RX and TX messages on bus using CANoe Trace window, any advice ?

0 Karan Saxena over 3 years ago in reply to Mirna Habib

TI__Guru* 78035 points

Hi Mirna

There are Tx and Rx tests as well in that application. You should be able to select options from a menu which gets printed on the console.

Regards

Karan

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

CAN TX/RX Messages Basic Test