TINA-TI: [ERROR] Simulation using LMR33630B by TI using TINA-TI

Ihzany Vilia Devi

Part Number: TINA-TI

When I do the simulation TINA-TI using a spice model from TI LMR33630B I got an error message from ERC stated like this :

Please help me to confirm it, why i cannot use it on my TINA-TI

Thanks

0 Ihzany Vilia Devi over 2 years ago

because of the error, when i try running the simulation it takes a lot of time to calculating

0 Andrew Kutzler over 2 years ago in reply to Ihzany Vilia Devi

Hi Izhany,

Do you get this issue in PSPICE for TI?

Thanks,

Andrew

0 Ihzany Vilia Devi over 2 years ago in reply to Andrew Kutzler

no i got this issue from TINA-TI,

i've already giving a label TINA-TI not PSpice for TI sir

0 Andrew Kutzler over 2 years ago in reply to Ihzany Vilia Devi

Hi Ihzany,

Could you try the simulation in PSPICE for TI rather than TINA-TI? It's newer software, so I was thinking it may resolve the issue you have.

Thanks,

Andrew

0 Ihzany Vilia Devi over 2 years ago in reply to Andrew Kutzler

Hi I'm doing it too in PSpice for TI, but i want to compare the result with TINA-TI

if this model already good i think there will be no problem when i'm trying to input this model into the TINA-TI.

So please take a look more into this problem!

Thanks

0 Andrew Kutzler over 2 years ago in reply to Ihzany Vilia Devi

Hi Ihzany,

I'm sorry, but TINA-TI is no longer supported.

Thanks,

Andrew

Simulation, hardware & system design tools forum