TIDA-010237: Layers missing in Gerber file package?

AnBer

Part Number: TIDA-010237

Team,

Could you please double check the Gerber files?

The feedback I got from customer is that the PCB is routed on 4 layers but only two routed layers are present in the files:
https://www.ti.com/tool/TIDA-010237#design-products
https://www.ti.com/lit/zip/tidcgd0

Can you confirm?
Can the PCB be reproduced again just with those Gerber file data?

Thanks in advance,

over 1 year ago

0 Errol Leon6 over 1 year ago

TI__Expert 5830 points

Hi A.

Thank you for pointing this out. It looks like you are right and the 2 inner layers are not in the gerbers. We will have that fixed shortly.

Best regards,

Errol

0 AnBer over 1 year ago in reply to Errol Leon6

TI__Mastermind 28880 points

Hi Leon,

Thanks,

Could you please already post the corrected Gerber file on this E2E post so that customer can already move forward?
I assume it is going to take some days to have the new zip file on TI.COM.

Thanks in advance,

0 Errol Leon6 over 1 year ago in reply to AnBer

TI__Expert 5830 points

Hi A,

Attached are the zip files for the Gerbers with the 4 layers.

Gerber Output.zip

as well as the NC Drill files

NC Drill Output.zip

Best regards,

Errol

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-010237: Layers missing in Gerber file package?