Dear JC Zhu,

Good morning.

Thank you for your reply.

We will contact vendor.

But if there is any way to model in TI for Pspice simulator or TinaV9.3 ,please let me know.

Thank you,

Girish kantharaju

Dear JC Zhu,

Good afternoon.

We are having 3 phase delta voltage source(400V) and we are converting to low voltage by using X rated capacitor,rectifier and zener diode(16V).

So please note that we are using 3 phase voltage source without neutral that is Delta (in secondary side and primary side it is star).

After rectifier section,we are getting current 60mA in Tina simulation but in practical scenario we are getting 120mA.

Can we share the simulation file with you.

Thank you,

Girish Kantharaju

Please share your TINA file.

-JC

Dear JC Zhu,

Good morning.

I have shared you file in private message.

Please check.

Thank you,

Girish kantharaju

Thanks Girish. See my reply in messaging.

-JC