This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PMP22650: pick and place files

Part Number: PMP22650

Hi Team, 

Good day. I am posting this inquiry on behalf of the customer.

"I would like to ask you if you have the pick and place files for this inverter? In the files has a BOMs and gerber files, but hasnt a pick and place files."

Please help to advise. Thank you for extending your support.

Kind regards, 


  • Hi Marvin,

    I have asked the original designer to get back to you. Please give us some time.



  • PMP22650E3_PnP.xlsThe pick and place file for the E3 version is attached.

  • Hi Brent, 

    Thank you for your response. The customer asked for the latest Gerber files, Boms, and pick and place files that are needed to make the inverter.

    I directed him to download the design files on the product page.

    Please see the feedback from the customer.

    "Thank you for your fast response!

    I just need some guidelines. 

    For the inverter I will need this file, right? 

    Or its PMP22670E2? But you sent me PMP22650E3_PnP.xls Considering the file name I need exactly the first or ? Just I need a little bit of help how to figure out which files are for the inverter and which are for the driver and etc. 

    I think that I need: and PMP22650E2(001)_TI-BOM.PDF - for the inverter, correct me if I'm wrong. 

    PMP22712E2 and PMP22712E2(001)_TI-BOM.PDF, correct me if I'm wrong. 

    PMP22773E3 and PMP22773E3(001)_TI-BOM.PDF, correct me if I'm wrong. 

    Оne of the last two is for the controller F280039C which I will buy from you. 

    PS. I need also the other pick and place files, please. It's appreciated!"

    Please help to advise. Thank you for extending your support.

    Kind regards, 


  • I'm attaching the latest gerbers for the main board.