TIDA-01606: J33 15V power

Hi Yang,

you can use a ordinary switching power supply, like the one with fixed output voltage. But be aware, if you have version E5 you need to use 15 V. If you have version E6 you need to use 24 V (current one online).

Thanks

Best Regards

Riccardo

Thanks Riccardo, I also have a question about the fan. Whether we need to connect a cooling fan and how much power of the fan the board supports?

Yang,

you can connect the fan to the following pin J26 and J28. You will need 12 V fans. Having around 3 W each fan (three in total for example) is going to be a good choice.

Please remember that in order to active the fans, you need to active them from software (TINV_fanSet).

Thanks

Best Regards

Riccardo

Hi Riccardo,

Got it, many thanks for your help.