TIDA-010081: TIDA-010081

Venkatesh B

Part Number: TIDA-010081

Hi,

In this output side(secondary transformer),output voltage polarity comes negative if we consider dot polarity as per Reference design.

Kindly clarify my doubt, whether my assumption is wrong or reference design it is reversed

Thank you

Venkatesh B

over 3 years ago

0 Max Wang1 over 3 years ago

TI__Intellectual 2180 points

Hi Venkatesh

sorry, I didn't get your point, do you mean you want to change output voltage polarity, or you mean there is something wrong in the schematic, basically, since this is an isolated output design, you can easily change output polarity

Max

0 Venkatesh B over 3 years ago in reply to Max Wang1

Intellectual 803 points

I have doubt in Polarity of theoretical concepts vs actual in schematics.

i am frightened it may be in wrong in schematics,correct me if i wrong please

0 Venkatesh B over 3 years ago in reply to Venkatesh B

Intellectual 803 points

+1 Max Wang1 over 3 years ago in reply to Venkatesh B

TI__Intellectual 2180 points

this should be correct.

Max

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-010081: TIDA-010081