PSPICE-FOR-TI: CS1893166

Aurélien Leloir

Hi,

Trying to launch Pspice for TI that I recently got (less than 2 weeks). But the .exe file does not reach the end of the booting process. Only a small pop-up appears briefly before all disappears like nothing had been running all this time.

Could you solve the issue ? (I already tried solutions given in previous tickets on the forum)

Thanks for your support !

Aurélien

over 3 years ago

0 JC Zhu over 3 years ago

TI__Mastermind 37790 points

Hi Aurélien,

Were you ever able to run it after the installation?

Thanks,
JC

0 Aurélien Leloir over 3 years ago in reply to JC Zhu

Prodigy 20 points

Hi, no never. The process seems to kill itself after a few seconds.

0 JC Zhu over 3 years ago in reply to Aurélien Leloir

TI__Mastermind 37790 points

Hi,

Please create an environment variable (set the value to a place you have write permission):

Now try launch the tool again. Then share the file lic.log.

Thanks,
JC

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PSPICE-FOR-TI: CS1893166