• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 37 subscribers
  • Views 367 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

about access violation error

rogin
Prodigy 30 points

Hello. this is seongmun kim. 

for noise analysis, i tried to run the simulation. but i faced this kinds of issue "access violation at address 008b936b in module 'tina.exe' " . 

when i edited Macro by Netlist viewer, i got the error message. 

how do i fix the problem?? 

  • 0
    TI__Guru 71526 points

    Hello seongmun,   

    Thank you for your inquiry about TINA.  Since TINA is a DesignSoft/TINA program, questions are handled by using the DesignSoft support page: http://www.tina.com/technical-support/  . 

    The DesignSoft/TINA team is very helpful and this is the most direct way for TINA support.  Please advise by clicking the  This resolved my Issue  button when the problem has been solved.    

    Regards, 

    ~Leonard