TINA TI Thermal Simulation

Hello 

Typically the inductor vendor should give the thermal rise info of the inductor. 

Thanks

Tahar

Hi,

Based on your answer, I don't think you understood my question...

I know that the vendor gives the thermal rise info on the inductor datasheet.

I am asking if TINA TI can simulate thermal rise to CONFIRM the data on the datasheet of the inductor.

Hello Evgeni,   

Thank you for your inquiry about TINA.  Since TINA is a DesignSoft/TINA program, questions are handled by using the DesignSoft support page: http://www.tina.com/technical-support/  . 

The DesignSoft/TINA team is very helpful and this is the most direct way for TINA support.  Please advise by clicking the  button when the problem has been solved.    

Regards, 

~Leonard