too many machines attempting to connect with the same access key

Manfred Karnberger

Prodigy 30 points

Hi, my windows setup was reinstalled and now I have problems to reinstall pSpice for TI again.

I get the hint that too many machines attempting to connect with the same access key.

Can you help me ?

regards

Manfred Karnberger

over 1 year ago

0 David Larkin over 1 year ago

TI__Mastermind 20460 points

Hi Manfred,

We can either disable all machines (if you don't have PSpice installed on more than 1 computer) and then you can install.

If you have it installed on more than 1 computer and want to keep some current installations, I'll need to know the names of the machiens with a go/no-go decision.

Just let me know what works best for you.

David

0 David Larkin over 1 year ago in reply to David Larkin

TI__Mastermind 20460 points

Hi Manfred,

I apologize for the long delay. I've finally received word that your old machines have been disabled.

You should be able to complete a new install of PSpice for TI now.

I will close this, and the other ticket.

Please let me know if there are any other problems.

Regards,

David

+1 David Larkin over 1 year ago in reply to David Larkin

TI__Mastermind 20460 points

Manfred,

The old machines have been disabled.

You can now proceed with installing on your new computer.

What is the issue that you are seeing?

David

0 David Larkin over 1 year ago in reply to David Larkin

TI__Mastermind 20460 points

Have you been able to install on your new computer?

0 Manfred Karnberger over 1 year ago in reply to David Larkin

Prodigy 30 points

Dear David,

thanks a lot for your help. It works fine now. I'm really happy and lucky that I can continue to evaluate ic's from ti.
have a good time...

with best regards from switzerland

Manfred Karnberger

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

too many machines attempting to connect with the same access key