BQ20Z655DBTR-R1 EVSW's software I want to get it

junho kim

Other Parts Discussed in Thread: BQEVSW, BQ30Z554-R1, BQ20Z655-R1

Hello, BQ20Z655DBTR-R1

software cannot be resolved.

I am attaching the program comparison table by organizing it.

First of all, the program is different.

I can't check if the program you recommended is also possible

I'm telling you based on the EVM specification, so please check it.

Warning lamp abnormality at program start I'm sending you the attached file.

BQ20Z655DBTR-R1 EVSW's software I want to get it

NSE Co.,Ltd

Gugo office. Ma-3201,15 Gyeongin-ro 53 gil, Guro-Gu, Seoul, 08217

Head office. 1111, 10, Gyeongin-ro 53-ga gil, Guro-gu, Seoul, 08214

TEL. 02-6679-8195,8159 FAX. 02-6679-8196 H.P. 010-5099-8195

E-mail. nse@nselec.co.kr

11 months ago

0 Wyatt Keller 11 months ago

TI__Guru** 103395 points

Hello Junho,

Please share the firmware version and build information of the devices you are trying to interface with. Are you looking for the EVSW for the gauge?

Sincerely,

Wyatt Keller

0 junho kim 11 months ago in reply to Wyatt Keller

Prodigy 20 points

BQ20Z655DBTR-R1 EVSW's software I want to get it nse@nselec.co.kr

0 Wyatt Keller 11 months ago in reply to junho kim

TI__Guru** 103395 points

Hello Junho,

Please share the exact build and version information since each EVSW is designed for specific build of the firmware.

I have sent you a request.

Sincerely,

Wyatt Keller

0 junho kim 11 months ago in reply to Wyatt Keller

Prodigy 20 points

BQ20Z655EVM BQ20Z655EVM board software lost.

Can you send the software by e-mail?

nse@nselec.co.kr

0 Wyatt Keller 11 months ago in reply to junho kim

TI__Guru** 103395 points

Hello Junho,

Please share the exact build and version information of the gauge you are using. You should be able to follow the TRM guidance on which commands will return this information, since each EVSW is designed for specific build of the firmware.

Sincerely,

Wyatt Keller

0 junho kim 11 months ago in reply to Wyatt Keller

Prodigy 20 points

I want to get software support even if it's a basic version, but can't I?

The circuit was completed, but the software could not receive the data from the Ti website.

0 junho kim 11 months ago in reply to junho kim

Prodigy 20 points

bqEV-EASYSetup00.09.xx.exe I'd like to receive a file that I can run.

After that, I'll ask you about any additional questions

0 Wyatt Keller 11 months ago in reply to junho kim

TI__Guru** 103395 points

Hello Junho,

Please accept the PM request I have sent you.

Please try downloading the BQEVSW software and see if the device version you need is present: https://www.ti.com/tool/BQEVSW

Sincerely,

Wyatt Keller

0 junho kim 11 months ago in reply to Wyatt Keller

Prodigy 20 points

I checked the reply data of T.I you sent me.

I checked that this software is a different BQ30Z554-R1 software

It is checked and the pin map and the number of pins are all different.

So read the opinions of BQ20Z655-R1 you shared yesterday

All inquiries about the interface process after the software installation are related to the software download

I can't check the installation, etc.

Device : bq20z655-R1 FW version : V0_03_BLD0004 software Is it possible?

I'd like to receive an email or link.