• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 170 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TIDA-010030: Wake up Circuit and Communication with Bqstudio

TIDA-010030: MSP430 Controller Programming without Launch Pad

SAPTARSHI BISWAS
Prodigy 90 points
Part Number: TIDA-010030
Other Parts Discussed in Thread: BQ76940, BQ34Z100

Hello,

Please suggest, without launch pad, Can we load the Programme in MSP430FR controller used in TIDA -010030 with the available Ports in the PCB.

Is any firmware generated for the same application  (TIDA-010030),  if exists, could your please share it.

Thanks and Regards

  • 0
    Prodigy 90 points

    Sir,

    also please suggest, without firmware loading in MSP 430 Controller can we run the BMS circuit to check the minimal operations carrying out by BQ76940 and bq34z100 and performing Charging and Discharging of Battery.

    Regards

  • 0 in reply to SAPTARSHI BISWAS
    TI__Expert 3345 points

    Hi, 

    Unfortunately TIDA-010030 doesn't support MSP430 FW, I will suggest you to refer below code examples to create your own FW. 

    SLUC583 — bq769x0 I2C Sample Code With CRC 

    Even without FW programmed in MSP430, you can still use TI GUI to check if HW works as expected. 

    SLUC539 — bq76940/bq76930/bq76920 Evaluation Software

    BQSTUDIO

    Ryan Tan