TIDA-010030: MSP430 Controller Programming without Launch Pad

SAPTARSHI BISWAS

Part Number: TIDA-010030
Other Parts Discussed in Thread: BQ76940, BQ34Z100

Hello,

Please suggest, without launch pad, Can we load the Programme in MSP430FR controller used in TIDA -010030 with the available Ports in the PCB.

Is any firmware generated for the same application (TIDA-010030), if exists, could your please share it.

Thanks and Regards

over 2 years ago

0 SAPTARSHI BISWAS over 2 years ago

Prodigy 110 points

Sir,

also please suggest, without firmware loading in MSP 430 Controller can we run the BMS circuit to check the minimal operations carrying out by BQ76940 and bq34z100 and performing Charging and Discharging of Battery.

Regards

0 Ryan Tan over 2 years ago in reply to SAPTARSHI BISWAS

TI__Expert 3356 points

Hi,

Unfortunately TIDA-010030 doesn't support MSP430 FW, I will suggest you to refer below code examples to create your own FW.

SLUC583 — bq769x0 I2C Sample Code With CRC

Even without FW programmed in MSP430, you can still use TI GUI to check if HW works as expected.

SLUC539 — bq76940/bq76930/bq76920 Evaluation Software

BQSTUDIO

Ryan Tan

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-010030: MSP430 Controller Programming without Launch Pad

SLUC583 — bq769x0 I2C Sample Code With CRC

SLUC539 — bq76940/bq76930/bq76920 Evaluation Software

BQSTUDIO