PSPICE-FOR-TI: CAN'T open file

Nathan Ding

Genius 12465 points

Part Number: PSPICE-FOR-TI

Hi Team,

I have a problem when opening a project with PSPICE.

Could you please help with the error below? Thanks.

Regards,

Nathan

0 David Larkin over 1 year ago

Hi Nathan,

Can you try what the user in this thread did?

David

0 Nathan Ding over 1 year ago in reply to David Larkin

Hi David,

It still doesn't work.

And I also find that I can't New a new project, when New->Project, it shows the error below.

So it seems that I can't open the project, can't create the new project...

Could you please help with this?

Regards,

Nathan

0 David Larkin over 1 year ago in reply to Nathan Ding

Hi Nathan,

Let me check with Cadence on this. What version are you using? 17.4-S009, or 23.1-S001?

David

0 David Larkin over 1 year ago in reply to David Larkin

Hi Nathan,

Can you try the following steps:?

1. Start Capture

2. Run DboTclHelper_ReRegisterOrCADPlugins in the Command Window (if it is not shown at the bottom, enable it from View > Command Window).

3. Close Capture and restart

Reference link to Cadence:

David

+1 Nathan Ding over 1 year ago in reply to David Larkin

Hi David,

It works now, thanks for help!

Regards,

Nathan

Simulation, hardware & system design tools forum