LP-XDS110: debug connection cable with CompactTI 20-pin connector (CTI-20)

Hi Rana,

What you are looking for is a breakout board. For example: https://www.digikey.com/short/zw3z7fv8

Or use jumper wires.

Best regards,

Bun

i need debug cable (20 pin cable). as shown in the link

https://www.ti.com/content/dam/ticom/images/products/ic/microcontrollers/performance/evm-board/tmdsemu110-u-box.png:large

please guide on this.

Thank you Bun