PMP10215: Alternate parts for the powersupply

Hello Tobias,

Both parts used for L3 and T1 are custom magnetics.

L3 is a pretty simple PFC toroidal inductor, without any auxiliary winding, so it should not be difficult to find a similar one on the WEB.

T1 is more specifically designed for this board, and I don't think it will be possible to find an off-the-shelf part.

If that helps, I attach here the specifications that have been sent to the magnetic manufacturer and have them developed, both datasheets and in addition a similar custom transformer developed by another manufacturer (Renco) which I couldn't have the possibility to test.

Please let me know if these data are sufficient or you need further support.

Best regards,

Roberto

750316373r00 L3.pdf6562.750315800r02 T1.pdfRLTI-1224 DATA SHEET.PDFPMP10215 Rev_A PFC Inductor Requirement.pdfPMP10215 Rev_A 2-Switch Forward Transformer Requirement.pdf