TIDA-020047: Issue Implementing TIDA-020047

Joselito Go

Part Number: TIDA-020047

Tool/software:

Hi Experts,

I use the E:\ti\mmwave_mcuplus_sdk_04_06_00_01\mmwave_mcuplus_sdk_04_06_00_01\ti\utils\test\cascade\am273x\am273x_cascade_mss.xer5f to run the TIDA-020047 have this error

Please help.

Regards,

Joselito Go
Texas Instruments Customer Support

10 months ago

0 Ali Syed 10 months ago

TI__Expert 6720 points

Hi Joselito,

I am in process of reproducing your test case. I will setup the TIDA 020047 and provide feedback ASAP.

regards,

Ali

0 Ali Syed 10 months ago in reply to Ali Syed

TI__Expert 6720 points

Hi Joselito,

Please ask customer the steps taken to setup the EVM. Are they using a DCA1000 EVM? If they are using CCS, have they flashed the CCS debug image?

Is customer following the instructions in user guide as below:

thanks,

Ali

0 Joselito Go 10 months ago in reply to Ali Syed

TI__Expert 5900 points

Hi Ali,

I have solved the previous problem. The current running results are as follows.

I want to confirm whether you can collect ADC data according to the steps in the instructions of user guide. To collect ADC data, does the DSP part need to work?

Regards,

Joselito Go
Texas Instruments Customer Support

0 Ali Syed 10 months ago in reply to Joselito Go

TI__Expert 6720 points

Hi Joselito,

Per my understanding if you are using the DCA1000, then the raw ADC data processing, you don't need DSP. I am checking further to get more details.

regards,

Ali

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-020047: Issue Implementing TIDA-020047