• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 455 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-01487: TIDA-01487 - Tesla implementing Isolated CAN and integrate a CAN node

Rahaf Haddad
Prodigy 20 points

Part Number: TIDA-01487

Tool/software:

Customer investigating implementing an isolated CAN bus repeater as outlined here: https://www.ti.com/tool/TIDA-01487#applications

They want to know on how best to also integrate a CAN node device in to the isolated repeater, as below

 

  • 0
    TI__Expert 5480 points

    Hi Rahaf,

    Thank you for your question. Based on my understanding, you plan to add a CAN controller to the network - is this correct? In principle you just need to add a CAN transceiver (e.g. TCAN1042) to the CAN controller, and connect it to the CAN_H/CAN_L pins. 

    If this adding a CAN controller like this was not your plan :-) then please provide some more detailed description of what you want to achieve.

    Thank you and best regards,

     Thomas