PSPICE-FOR-TI: Cannot open PSPICE for TI schematic on Orcad Capture

Hi Xuan,

Can you try saving the project and opening that in Capture?

Cadence is working to simplify their structure, and DSN is de-prioritized.

Also, what version of Capture are you using?

David

Hi David, thanks for your response. I have tried saving it as both Capture Design and Capture 16.2 Design, but it doesn't work. 

My PSPICE version is 23.1-2024 S001, while my orcad capture version is 17.2-2016 S072.

Let me check in with Cadence. I would hope there wouldn't be some incompatibility but you never know.

thanks. looking forward to your feedback

Hey Xuan,

Here's Cadence's response. 

As per my understanding, design which is not getting opened in 23.1 Capture and 17.2 Capture, was originally created using PSpice for TI.

In order to look into this issue, could you please share the design files with me? Does user has any backup of this design project?  In case, design is corrupted, it can be recovered using back-up file.

Also, let me know which operating system, customer is using? and where is this design present? Is it on local disk or present on any network location/drive?

David

Hi Xuan,

Any progress on this?

David

Hi Xuan,

Can you archive your project and attach here? Insert->Image/Video/File

David

Hi Xuan,

Are you still having this problem? If so, can you archive the design and attach here?

David

Hi David, the issue still not resolved. Sorry, I cannot share the file to outside company as per company regulation.