LM5185-Q1: TINA spice model for LM 5185

Manoj Gunda SVSM

Part Number: LM5185-Q1
Other Parts Discussed in Thread: LM5185, , PSPICE-FOR-TI

Tool/software:

Hello ,

I want to consider LM5185 for my design, but could nt find the TINA spice of LM5185, can you provide the TINA spice model for the same.

5 days ago

0 Youhao Xi 4 days ago

TI__Guru* 75915 points

Hello,

Thank you for designing with the LM5185-Q1. Sorry that we just have the model created by Pspice Ver.17.4, and we do not yet have the TINA model. I am forwarding to the new group which will take over the support of the LM5185-Q1, and they may update if a TINA model can be planned. For the time being, please use Pspice, or the free tool Pspice-for-TI. https://www.ti.com/tool/PSPICE-FOR-TI

Best Regards,

Youhao

0 Manuel Alva Hernandez 4 days ago

TI__Genius 9221 points

Hello,

TINA model for LM51850Q1 is not in the plan as of now. I will keep this request noted in case it becomes a project in the future.

Thank you

0 Manoj Gunda SVSM 4 days ago in reply to Manuel Alva Hernandez

Prodigy 10 points

thanks for the suggestion , few of the pspice models are can be imported as Macro, if do the same it gives a error as below. is there a way to resolve it or only to use pspice of ti ,

0 Manuel Alva Hernandez 3 days ago in reply to Manoj Gunda SVSM

TI__Genius 9221 points

Manoj,

-I recommend using the latest version of Pspice. I have never used Macros, so I cant help you on the error.

Thank you

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

LM5185-Q1: TINA spice model for LM 5185