PMP11257: The PMP11257 evaluation board circuit does not require input auxiliary power μA

Links

Part Number: PMP11257
Other Parts Discussed in Thread: TPS2378,

Tool/software:

PMP11257 Evaluation board circuit, if the input auxiliary power supply is not required, can the TPS2378 peripheral and auxiliary input circuits be removed?

7 months ago

0 Darwin Fernandez 6 months ago

TI__Mastermind 41800 points

This is currently being looked into, an answer will be posted when available. thanks!

0 Darwin Fernandez 6 months ago in reply to Darwin Fernandez

TI__Mastermind 41800 points

Hi Links, yes you can remove this aux circuit; however, you still need to pull APD LOW. So a pull down resistor from APD to RTN. Or a short from APD to RTN is required. Thanks!

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PMP11257: The PMP11257 evaluation board circuit does not require input auxiliary power μA